WNMG433-DR YBD152 (10 pieces)
Product Description
Part Number: WNMG433-DR YBD152
ISO Type: WNMG080412-DR YBD152
Grade: YBD152. Chip Breaker: DR
Grade Description: Medium thick TiCN + medium thick Al2O3 coating on carbide, a grade of Black Diamond Series for Iron Machining (color: black)
Workpiece Material (ISO): Cast Irons (K10-K25)
Dimension (inch): L=0.343, I.C.=0.500, S=0.187, d=0.203, r=0.047
Application: The insert has multi-layer CVD coating on high-strength ultrafine tungsten carbide. It is suitable for roughing of cast irons at medium to high speeds. It can be used for light interrupted turning at medium speeds.
Depth of Cut (ap): 3-12 mm. Feed Rate (fn): 0.3-0.8 mm/r. Speed (vc): 190-450 m/min
Note: Product sold in packs of 10 units.
Click here to WNMG433 main page.
ISO Type: WNMG080412-DR YBD152
Grade: YBD152. Chip Breaker: DR
Grade Description: Medium thick TiCN + medium thick Al2O3 coating on carbide, a grade of Black Diamond Series for Iron Machining (color: black)
Workpiece Material (ISO): Cast Irons (K10-K25)
Dimension (inch): L=0.343, I.C.=0.500, S=0.187, d=0.203, r=0.047
Application: The insert has multi-layer CVD coating on high-strength ultrafine tungsten carbide. It is suitable for roughing of cast irons at medium to high speeds. It can be used for light interrupted turning at medium speeds.
Depth of Cut (ap): 3-12 mm. Feed Rate (fn): 0.3-0.8 mm/r. Speed (vc): 190-450 m/min
Note: Product sold in packs of 10 units.
Click here to WNMG433 main page.